A complete range of LV cables developed under the most stringent international standards.
A full range of power, control, instrumentation and low voltage marine cables. All of them available in armoured and unarmoured versions and also according to the fire performances: flame and fire retardant, and fire resistant.
X-VOLT RHVhMVh Copper cable for the transmission and distribution of electricity in a medium voltage network. This cable is recommended for installations where there may be a risk of oils and/or hydrocarbon type chemical agents coming into contact with the cable.
Electrical performance
MEDIUM VOLTAGE: 6/10 kV, 8,7/15 kV, 12/20 kV and 18/30 kV.
Standard
IEC 60502-2 / Repsol.
Approvals
Repsol
Thermal performance
Maximum service temperature: 90ºC.
Maximum short-circuit temperature: 250ºC (max. 5 s).
Minimum service temperature: -15ºC
Fire performance
Flame non-propagation based on UNE-EN 60332-1.
Low corrosive gases emission: cables up to 6/10 kV: < 15%.
Mechanical performance
Minimum bending radius: x15 cable diameter.
Abrasion-resistant.
Tear-resistant.
Chemical performance
Oil resistant: based on UIC 895 OR.
Hydrocarbon resistant: based on UIC 895 OR.
Installation conditions
Open Air.
Buried.
In conduit.
Applications
Distribution networks.
Other
Meter by meter marking.
Conductor
Copper conductor, class 2, based on EN 60228 and IEC 60228.
Internal semiconductor
Screen over the conductor, made of thermosetting semiconductor material.
Insulation
Cross-linked polyethylene (XLPE), in dry atmosphere catenary tube, through a triple layer extrusion process.
External semiconductor
Screen over the insulation, made of thermosetting and strippable semiconductor material.
Cable conductor identification
The conductors are identified with a tape placed along the cable between the outer semiconductor and the screen. Colours are; brown, green and yellow.
Metallic screen
Screen of copper wires and cross-wound of copper tape placed helicoidally. (H1 screen).
Cabling
The three conductors are wound helicoidally with their screens in contact. Bedding is used to fill the spaces between the conductors to achieve a better cylindrical finish.
Bedding
The special PVC compound bedding gives a high level of resistance to hydrocarbons and mineral oils.
7. Armour
Galvanized steel wire wrapped helicoidally around the cable and fixed with a counter-wound metal tape.
8. Outer sheath
The special PVC outer sheath compound gives a high level of resistance to hydrocarbons and mineral oils. Red colour.
MEDIUM VOLTAGE 3,6/6 kV - 6/10 kV. 8,7/15 kV.- 12/20 kV – 18/30 kV
Flame non-propagation based on UNE-EN 60332-1.
Maximum service temperature: 90ºC.
Distribution networks.
MECHANICAL PERFORMANCE
Abrasion resistant.
Minimum bending radius: x15 cable diameter.
Tear resistant.
CHEMICAL PERFORMANCE
Hydrocarbon resistant: based on UIC 895 OR.
Oil resistant: based on UIC 895 OR.
ELECTRICAL PERFORMANCE
MEDIUM VOLTAGE 3,6/6 kV – 6/10 kV.
8,7/15 kV.- 12/20 kV – 18/30 kV
FIRE PERFORMANCE
Flame non-propagation based on UNE-EN 60332-1.
Low corrosive gases emission: cables up to 6/10 kV: < 15%.
THERMAL PERFORMANCE
Maximum service temperature: 90ºC.
Maximum short-circuit
temperature: 250ºC (max. 5 s).
Minimum service temperature: -15ºC
APPLICATIONS
Distribution networks.
APPROVALS
Repsol
BASED ON
IEC 60502-2 /Repsol ED-P-10.01-01.
INSTALLATION CONDITIONS
Buried.
In conduit.
Open Air.
OTHERS
Meter by meter marking.
If you have any questions, please contact us. We’ll do our best to help.
